圆球绕流场的尾涡分析和升阻力研究

采用自编的分块算法程序模拟了雷诺数在20～1000之间的圆球绕流场.在Re=25时捕捉到流动分离,与试验结果一致.对Re=250时稳态非对称尾流区内流体的输运情况进行研究,证实圆球绕流场中纵向对称面的存在.对于非稳态流动,主要研究了阻力和横向力的时间变化规律,并分析了频谱特征.计算发现横向合力主要在横截面上两个很窄的区间内偏移.经过几种不同涡定义方法的优劣测试,本文采用Hunt等人介绍的Q-定义方法对非稳态绕流场的尾涡结构进行了直观描述.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

J2项和大气阻力摄动作用下卫星编队构型的演化分析

研究卫星编队构型在J2项摄动和大气阻力摄动作用下的演化进程。从相对运动动力学模型出发,分别加入J2项摄动和大气阻力摄动因素,采用数值积分对所获得的运动方程求解,得到参考星和环绕星在惯性坐标系中的绝对运动规律;将两星的绝对运动规律作差后,利用坐标转换矩阵,将惯性坐标系中两星的相对运动规律转换到Hill坐标系中。由于该方法没有经过任何简化,故研究摄动的影响时不存在误差。最后通过仿真分析,给出了J2项摄动和大气阻力摄动作用下卫星编队构型演化的相关结论,并提出进一步研究的方向。     

某圆周缝型救生伞的充气性能研究

为获得新型圆周缝结构救生伞的充气性能,文章采用任意拉格朗日欧拉流固耦合方法对该救生伞进行了充气过程的数值模拟,用空投试验结果验证了该数值方法的可行性。数值结果得到了绕伞衣流场、伞衣外形、运动的动态信息,对数值结果的分析发现初始充气阶段后期流场对上部伞衣影响很大,为充气过程中上部伞衣的控制提供了依据,但是初始充气期救生伞的摆动角度小于充满期。对于结构透气量不对称设计的伞衣,不对称充气是绝对的,圆周缝会首先在结构透气量少的部位张开。结果表明,对不同的圆周缝节点设计不同的开缝力将有助于保持良好的对称充气状态,改变开缝力的设计参数将会改变圆周缝的开缝时间及圆周缝完全张开所需的时长,将达到更好的减载效果。研究结果对圆周缝型降落伞的优化设计有一定的参考作用。     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow(a lumped vortex model)

For purpose of easy identification of the role of free vortices on the lift and drag and for purpose of fast or engineering evaluation of forces for each individual body,we will extend in this paper the Kutta–Joukowski(KJ) theorem to the case of inviscid flow with multiple free vortices and multiple airfoils. The major simplification used in this paper is that each airfoil is represented by a lumped vortex,which may hold true when the distances between vortices and bodies are large enough. It is found that the Kutta–Joukowski theorem still holds provided that the local freestream velocity and the circulation of the bound vortex are modified by the induced velocity due to the outside vortices and airfoils. We will demonstrate how to use the present result to identify the role of vortices on the forces according to their position,strength and rotation direction. Moreover,we will apply the present results to a two-cylinder example of Crowdy and the Wagner example to demonstrate how to perform fast force approximation for multi-body and multi-vortex problems. The lumped vortex assumption has the advantage of giving such kinds of approximate results which are very easy to use. The lack of accuracy for such a fast evaluation will be compensated by a rigorous extension,with the lumped vortex assumption removed and with vortex production included,in a forthcoming paper.     

双喉道喷管与飞翼布局无人机气动数值研究

利用超椭圆方法,设计了双喉道射流矢量喷管的气动外形,并采用S-A湍流模型数值研究了次主流压比、次流方向及喷管外形参数对其气动特性的影响。研究表明,当确定次主流压比SPR=3时,可依次确定该型喷管外形参数分别为空腔长度l=3h,空腔扩张角θ1=10°,空腔收敛角θ2=30°,二次流注入角α=120°时,矢量喷管的气动特性最优。将设计的气动最优喷管与飞翼布局无人机后体进行一体化设计,数值模拟了喷管对飞翼布局无人机升阻特性的影响,结果表明,双喉道射流矢量喷管能够很好地运用于飞翼布局无人机。     

基于零空间的改进直接分配法

直接分配法是解决操纵面冗余飞行器控制分配的一种有效方法,但直接分配法只能对指定方向上误差最小目标进行优化,这种缺点限制了直接分配法的应用。零空间可以在保持转矩不变的前提下对控制量进行调节,利用这种特性,在三维转矩直接分配的基础上,通过对零空间坐标K进行数学规划可以使其他性能指标达到最优。推导证明,控制量最小问题和阻力最小问题分别可以转化为对坐标K的线性规划与二次规划问题。仿真结果表明,给出的基于零空间的改进直接分配法可以实现控制量最小和阻力最小控制分配。     

重力空射稳定伞阻力特征自动化设计

为进行重力空射稳定伞的初步设计,文章以多体动力学软件(ADAMS)为二次开发平台,构建了重力空射箭-伞系统的动力学仿真模型;推导了火箭和稳定伞的气动模型,并利用动态链接子程序实现了气动力的加载;通过ADAMS命令语言建立了参数化模型和用户界面。在此基础上,自编可行方向优化算法实现了稳定伞阻力特征的自动化设计。最后,根据仿真计算结果对试验火箭出舱时间、安全通道、回收方式等问题进行了分析,为后续空射稳定伞的细节设计以及空射总体方案的确定提供了参考。     

弹翼对旋成体底部流动的影响

本文利用压强测量及纹影观测技术研究弹翼对旋成体底部流动及底阻的影响，研究对象包括有无收缩船尾的两种后体，并同时测量了模型的底面和侧面压强分布，通过实验观测结果和理论分析，得到较细致的弹翼干扰结果，有助于进一步认识底部注以动特性及上游干扰，对飞行器设计有实用意义。     

格栅翼减阻特性研究

为了探索减少格栅翼阻力的方法和途径 ,进行了超声速M∞ =2 .5 2 1下格栅翼的边框几何形状和尺寸以及格栅翼茎厚度、格栅几何形状对格栅翼阻力特性影响的风洞实验。结果显示 ,格栅翼的边框对格栅翼的阻力影响最大 ,选择合适的边框厚度和剖面形状可以有效地减少格栅翼的阻力